MALKO TAK is an additive package for making hard film, solvent deposited, water displacing type, corrosion preventive. The prepared oil can be applied directly to water wet metal surfaces, where they displace water, leaving a protective film. The additve gives excellent spreading properties and the prepared formulation may be applied either by dipping or by spraying.
Formulation Application:
This grade is intended for normal conditions and leaves a hard film. The film is resistant to handling and gives excellent protection. It can be used for protection during storage of valuable machine tools and as a final protective for tools and machined components in factory stores or shops.
Removal:
The protective films of all these grades can be removed by wiping off with rags/waste soaked in kerosene/mineral turpentine or by alkaline degreasents or solvent degreasing methods.
Technical Specifications
| 1. Appearance | Thick Amber liquid |
| 2. Specific Gravity@29 °C | 1.02 min |
| 3. Flash Point (COC) °C | 140 min |
| 4. Protection- Indoors for 10% solution with MTO | 3 months |
| 5. Protection- Outdoors for 10% solution with MTO | 1 months |
| 6. Coverage (sq. mt./ ltr.) for 10% solution with MTO | 70-85 |
| 7. Film Thickness (microns) for 10% solution with MTO | 3-4 |
| 8 Water displacement test as per IS:1154 | Passes |